Clarke PSV1A Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 10

Su Pompası Clarke PSV1A için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke PSV1A 11 sayfaları. Dirty water pump

CLEANING AND MAINTENANCE

MAKE SURE THAT THE PUMP IS DISCONNECTED FROM THE MAINS SUPPLY

BEFORE CLEANING, OR PERFORMING ANY MAINTENANCE.

•

These pumps should require no maintenance other than regular cleaning. If the

pump starts to show signs of wear or damage, contact your CLARKE dealer for

advice.

•

Do not attempt to repair the pump yourself, repairs must be carried out by your

CLARKE dealer, or contact the CLARKE Service Department, on 020 8988 7400.

•

Check the pump regularly to ensure the base is clear of leaves or other debris.

Replacing the Impeller

Pull off the base cover.

Remove the 3 screws on the base of the pump, and remove the cover.

Use a small flat headed screwdriver to remove the circlip.

Remove the impeller from the shaft.

Replace with a new impeller and lock it in place using the circlip.

Replace the base and use the 3 screws to secure. and push on the base cover.

WARNING!

Circlip