activTek INDUCT 10000 Handmatig - Pagina 11
Blader online of download pdf Handmatig voor {categorie_naam} activTek INDUCT 10000. activTek INDUCT 10000 16 pagina's. Electronic air purification system
Ook voor activTek INDUCT 10000: Handmatig (16 pagina's)
Pagina afdrukkenCHANGING THE ACTIVEPURE® CELL
WARNING: UV Light in operation. Disconnect unit from power supply before
Unplug unit. If the unit is hard wired,
1.
be sure the power to the unit is off.
Always follow OHSA electrical lockout
safety requirements to prevent
Accidental release of energy during
service or maintenance activities
3.
Remove the thumb screws on either
side of the ActivePure
the cell from the ballast assembly.
servicing. Failure to follow warnings may result in severe eye damage.
Cell to remove
®
2.
Remove the activTek INDUCT ballast
assembly by removing the four (4)
thumb screws and sliding the unit out.
4.
Replace ActivePure
reversing steps 1-3.
Cell by
®
11