Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Installatie Opmerking - Pagina 4

Blader online of download pdf Installatie Opmerking voor {categorie_naam} Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 14 pagina's. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ook voor Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Oplossingshandleiding (17 pagina's), Installatie Opmerking (46 pagina's), Witboek (19 pagina's), Beschrijving (1 pagina's), Product Bulletin (6 pagina's), Kennisgeving (4 pagina's), Gegevensblad (9 pagina's), Gegevensblad (18 pagina's), Witboek (18 pagina's), Configuratiehandleiding (8 pagina's), Installatie Opmerking (28 pagina's), Handleiding voor probleemoplossing (11 pagina's), Installatie Opmerking (18 pagina's), Gebruikershandleiding (17 pagina's), Installatie Opmerking (24 pagina's), Handmatig (19 pagina's), Installatie Opmerking (36 pagina's)

Installing and Removing a Flash PC Card

Figure 2

Flash PC card

write protection

To install and remove a Flash PC card (see

You can insert and remove the Flash PC card with the power on.

Note

Connect an ESD-preventive strap to the ESD connector on the switch.

Step 1

Face the front panel of the switch, and hold the Flash PC card with the connector end toward the slot, as

Step 2

shown in

Insert the card into the slot until it completely seats in the connector at the back of the slot and the eject

Step 3

button pops out toward you, as shown in

Note

To eject a Flash PC card, press the ejector button until the card is free of the connector at the back of the

Step 4

slot, as shown in

Remove the card from the slot and place it in an antistatic bag.

Step 5

Catalyst 6500 Series Supervisor Engine Flash PC Card Installation Note

Locating the Flash PC Card Write Protection Switch

Flash PC card

Figure

3a.

The card does not insert all the way inside the slot; a portion of the card remains outside the slot.

Do not attempt to force the card past this point.

Figure

3c.

Flash PC card

shown with write

protection off

Figure

3), perform these steps:

Figure

3b.

78-6507-06