ACU-RITE SENC 150 Referentiehandleiding - Pagina 16

Blader online of download pdf Referentiehandleiding voor {categorie_naam} ACU-RITE SENC 150. ACU-RITE SENC 150 20 pagina's. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Ook voor ACU-RITE SENC 150: Installatiehandleiding (8 pagina's), Installatiehandleiding (4 pagina's), Installatiehandleiding (6 pagina's), Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken

8 Checking the mounting

Connecting the encoder

 Route the cables with slack loops

to allow for axis motion.

 Secure excess cable by fastening

with clips or ties.

 Attach the linear encoder connectors

to the readout.

Checking the electrical shielding

 Connect a ground wire from the

terminal on the back of the readout to

the machine or earth ground.

 Attach a ground wire from the machine

to a solid earth ground.

 With the encoder attached to the ma-

chine and the cable connected to the

readout, check shielding by measuring

resistance between connector housing

and scale unit.

Desired value: 1 Ω max.

SENC 150