ACU-RITE SENC 150 참조 매뉴얼 - 페이지 16

{카테고리_이름} ACU-RITE SENC 150에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ACU-RITE SENC 150 20 페이지. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
ACU-RITE SENC 150에 대해서도 마찬가지입니다: 설치 매뉴얼 (8 페이지), 설치 매뉴얼 (4 페이지), 설치 매뉴얼 (6 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

8 Checking the mounting

Connecting the encoder

 Route the cables with slack loops

to allow for axis motion.

 Secure excess cable by fastening

with clips or ties.

 Attach the linear encoder connectors

to the readout.

Checking the electrical shielding

 Connect a ground wire from the

terminal on the back of the readout to

the machine or earth ground.

 Attach a ground wire from the machine

to a solid earth ground.

 With the encoder attached to the ma-

chine and the cable connected to the

readout, check shielding by measuring

resistance between connector housing

and scale unit.

Desired value: 1 Ω max.

SENC 150