ACU-RITE SENC 150 Referans Kılavuzu - Sayfa 16

Medya Dönüştürücü ACU-RITE SENC 150 için çevrimiçi göz atın veya pdf Referans Kılavuzu indirin. ACU-RITE SENC 150 20 sayfaları. Chevalier fsg-2a 1224 surface grinder cross feed “x” axis
Ayrıca ACU-RITE SENC 150 için: Kurulum Kılavuzu (8 sayfalar), Kurulum Kılavuzu (4 sayfalar), Kurulum Kılavuzu (6 sayfalar), Talimatlar Kılavuzu (12 sayfalar)

Sayfayı Yazdır

8 Checking the mounting

Connecting the encoder

 Route the cables with slack loops

to allow for axis motion.

 Secure excess cable by fastening

with clips or ties.

 Attach the linear encoder connectors

to the readout.

Checking the electrical shielding

 Connect a ground wire from the

terminal on the back of the readout to

the machine or earth ground.

 Attach a ground wire from the machine

to a solid earth ground.

 With the encoder attached to the ma-

chine and the cable connected to the

readout, check shielding by measuring

resistance between connector housing

and scale unit.

Desired value: 1 Ω max.

SENC 150