Cisco ATA 186 Configuratie - Pagina 16

Blader online of download pdf Configuratie voor {categorie_naam} Cisco ATA 186. Cisco ATA 186 28 pagina's. Analog telephone adaptor
Ook voor Cisco ATA 186: Gegevensblad (7 pagina's), Overzicht (11 pagina's), Overzicht handleiding (11 pagina's), Configuratiehandleiding (8 pagina's), Gebruikershandleiding (12 pagina's), Installatie- en configuratiehandleiding (13 pagina's), Instructies voor installatie (6 pagina's), Configuratie (6 pagina's)

Refer to the appropriate illustration and follow these steps to

install your ATA:

Procedure

Place the Cisco ATA near an electrical power outlet.

Step 1

Connect one end of a telephone line cord to the Phone

Step 2

1 input on the rear panel of the Cisco ATA. Connect the

other end to an analog telephone set.

If you are connecting a telephone set that was

previously connected to an active telephone line,

unplug the telephone line cord from the wall jack and

plug it into the Phone 1 input.

Warning

To reduce the risk of fire, use only No. 26 AWG or

larger telecommunication line cord.