ESI ESPREE Montage- en bedieningshandleiding - Pagina 4

Blader online of download pdf Montage- en bedieningshandleiding voor {categorie_naam} ESI ESPREE. ESI ESPREE 8 pagina's. Pneumatic table base

ESPREE PNEUMATIC TABLE BASE

STEP 6

Repeat steps 2 through 5 for the other leg column.

• Raise leg to the vertical position.

• Loosely attach frame support bracket with four

M8x14 screws (again, with the long side of the

support bracket toward the front of the table).

• Tighten the pivot screws on each side of the

frame channel.

• Tighten the four M8x14 screws to 7 ft.-lbs.

WARNING: Do not activate the release lever

until the table is completely assembled and in

the upright position, and the safety ring has

been removed.

STEP 7

Change the length of the adjustable feet, if necessary.

• The length of the feet may be either 22" (55.9cm) or 28" (71.2cm). The feet are shipped in the 28" length.

• To change the length to 22", first remove the adjustment plate. Then use a 5mm Allen key to remove the

four screws, as shown.

• Slide the feet to the 22" length and reinstall the four screws with the 5mm Allen key.

Adjustable

Length

28"

22"

Do Not Activate

Release Lever

Pivot Screw

Adjustment

Slide In

5mm

Allen Key

ASSEMBLY

Frame

Support

Bracket

Plate