Crestron 4 Series Skrócona instrukcja obsługi

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler Crestron 4 Series. Crestron 4 Series 8 stron. Control processor for zūm lighting control system
Również dla Crestron 4 Series: Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (6 strony), Szybki start (5 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Pierwsze kroki (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (12 strony)

MC4/MC4-I

The Crestron®

MC4

and

MC4-I

secure, high-performance, cost-effective control processors and

interfaces. Their small form factor and versatile mounting options make

them ideal for applications such as single-room systems, small to

medium-sized homes and offices, and MDUs (multidwelling units). The

control system includes a built-in infiNET EX® and ER wireless gateway

for acquiring wireless devices as well as numerous control ports for

controlling wired devices.

NOTE: The MC4 and MC4-I are functionally similar. For simplicity

within this guide, the term "control system" is used to refer to both

the MC4 and MC4-I unless otherwise noted.

In the Box

MC4 or MC4-I, 4-Series Media Room Controller

Additional Items

Rack Ear, Left (2053897)

Rack Ear, Right (2053896)

Nut, 10-32 (2004889)

Antenna, Dual Band, 2.4/5.8 GHz (2052945)

Cable, CAT5e, 5 ft (1.52 m) (2022311)

Connector, 3-Pin (2003575)

Connector, 4-Pin (2003576)

4-Series media room controllers provide

Install the Device

The control system may be mounted into a rack or onto a flat surface.

Rack Mounting

The control system occupies 1U of rack space when using the provided

rack ears.

1. Attach the rack ears to the device:

a. Insert the two threaded posts on the left rack ear up and into the

front opening in the left mounting flange of the control system.

Repeat this step for the right rack ear.

b. Attach the four provided nuts to the threaded posts to secure the

rack ears to the control system.

Quick Start