Crestron 4 Series Skrócona instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler Crestron 4 Series. Crestron 4 Series 8 stron. Control processor for zūm lighting control system
Również dla Crestron 4 Series: Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (6 strony), Szybki start (5 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Pierwsze kroki (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (12 strony)

MC4/MC4-I

Set the Time Zone

The time zone must be set on the control system to ensure that the

correct time settings are pushed to controlled devices.

To set the time zone:

1. Access the web configuration interface using either the device

IP address or the Crestron XiO Cloud service.

2. Navigate to Settings > System Setup.

3. Select the time zone where the control system is used from the Time

Zone drop-down menu.

4. Click Save Changes on the top right of the screen.

Assign the RF Channel

Set the RF channel of the control system prior to operation. The control

system can operate on channels 11 through 26. Crestron recommends

using RF channel 15 or 20. The default RF channel is 15.

For optimum performance when installing the control system in a

Wi-Fi® network environment, do not set the RF channel within a Wi-Fi

channel band. Refer to the information below when choosing the RF

channel in a Wi-Fi environment:

Gateway channels 11 through 14 are within the Wi-Fi channel 1 band.

Gateway channel 15 is adjacent to Wi-Fi channels 1 and 6.

Gateway channels 16 through 19 are within the Wi-Fi channel 6 band.

Gateway channel 20 is adjacent to Wi-Fi channels 6 and 11.

Gateway channels 21 through 24 are within the Wi-Fi channel 11 band.

Gateway channel 25 is adjacent to Wi-Fi channel 11.

Gateway channel 26 is neither within nor adjacent to any Wi-Fi band.

NOTE:

Crestron RF devices are divided into two categories: infiNET EX

network devices and Crestron Extended Range (ER) devices.

infiNET EX devices automatically set their RF channel assignment to

match the gateway's channel, whereas ER devices must have their RF

channel manually assigned to match the gateway's channel.

Use Crestron Toolbox to set the control system RF channel. From the

EasyConfig tool, navigate to Functions > infiNET EX Gateway. Refer to

the Crestron Toolbox help file for more information.

Quick Start