Crestron 4 Series Skrócona instrukcja obsługi - Strona 5

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Kontroler Crestron 4 Series. Crestron 4 Series 8 stron. Control processor for zūm lighting control system
Również dla Crestron 4 Series: Skrócona instrukcja obsługi (8 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (6 strony), Szybki start (5 strony), Skrócona instrukcja obsługi (6 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (2 strony), Pierwsze kroki (2 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (12 strony)

MC4/MC4-I

Configuration via Crestron XiO Cloud

The Crestron XiO Cloud service allows supported Crestron devices across

an enterprise to be managed and configured from one central and secure

location in the cloud. Supported devices are configured to connect to the

service. Use of the service requires a registered Crestron XiO Cloud

account.

NOTE:

The device may be disconnected from the service by navigating

to the Cloud Services tab in Crestron Toolbox software (Functions >

Device Info > Cloud Services). For details, refer to the Crestron

Toolbox help file.

To access the web configuration interface using the Crestron XiO Cloud

service:

1. Connect the control system to the network.

2. Record the MAC address and serial number that are labeled on the top

of the control system. The MAC address and serial number are

required to add the device to the service.

3. Do either of the following

For existing accounts, access the Crestron XiO Cloud service at

https://portal.crestron.io.

For new accounts, register for a Crestron XiO Cloud account at

www.crestron.com/xio-cloud-registration.

4. Claim the device to the service as described in the Crestron XiO Cloud

User Guide (Doc. 8214) at www.crestron.com/manuals.

5. Select the device from the cloud interface to view its settings.

Create an Admin Account

The first time the web configuration interface is accessed, a dialog box is

displayed asking the user to create an admin account. A similar message

is displayed when connecting to the device in Crestron Toolbox software if

an admin account has not already been created.

To create an admin account:

1. Enter a username and password for the admin account in the

appropriate text fields.

CAUTION: Do not lose the username and password for the admin

account, as the device must be reset to factory settings to regain

access.

2. Click OK. A dialog box is displayed stating that enabling authentication

will restart the web session.

3. Click Yes to confirm and restart. The username and password created

in step 1 must be entered to regain access to the web configuration

interface.

NOTE: The username and password must also be entered when

connecting to Crestron Toolbox or XPanel.

Quick Start