Bosch DISHWASHER Manual de instruções de instalação - Página 11

Imprimir página

Bosch DISHWASHER Manual de instruções de instalação

25"

(636 mm)

23-1/16"

(586 mm)

Figure 16

Figure 17

Figure 18

Door Panel Installation

DOOR PANEL INSTALLATION

SHU/SHE Models - Accessory Panel Installation

If you have an SHU/SHE model and have ordered an

accessory panel kit, install the panel prior to sliding the

1/4" max.

(6 mm)

dishwasher into place. The panel dimensions are shown in

Figure 16.

SHI Models - Panel Installation

SHI models come with additional mounting hardware and

a template sheet with installation instructions. The stain-

less steel models of the SHI series also come with two

extension pieces. The extension pieces are used to

match the control panel height (Figure 17, "B" dimension)

to the horizontal drawer line of the cabinets, and must be

installed as shown in on the template sheet. The standard

piece is used for drawer heights up to 6" (152mm); the

long piece is used for drawer heights greater than 6"

(152mm) but 6-7/16" (164mm) or less. If your drawers are

taller than 6-7/16", you can either slide the extension

piece in as far as it will go, or remove it and fit the door

panel directly below the control panel.

SHI/SHV Models - Panel Installation

SHV models come with additional mounting hardware and

a template sheet that will show you how to mount the

panel. One side of the template shows how to mount a

one piece panel; the other side shows how to mount a two

piece panel. Decide which type of installation you want

before proceeding with the installation.

Fig. 17

Dimension

SHI Only

Fig. 18

Dimension

D (SHI)

(SHI & SHV)

Extension "A"

Max. - Min.

Standard

Long

5/16 - 11/16"

11/16 - 1 1/8"

(8-18mm)

(18 - 29mm)

Panel Dimension

20 11/16" - 25"

(526mm - 635mm)

27 3/16" - 30 5/16"

(690mm - 770mm)

23 3/16" - 23 3/8"

(589mm - 594mm)

"B"

"C"

Max.-Min.

5 5/16"

5 5/8 - 6 7/16"

(135mm)

(143 - 164mm)