Bosch DISHWASHER Manual de instruções de instalação - Página 13

Imprimir página

Bosch DISHWASHER Manual de instruções de instalação

Leg

Leveler

Locking

Screw

Figure 23

Silver

Spring

Clamp

Gold

Screw

Clamp

Figure 24

Figure 26

Drain Hose Connection

2 After the unit is installed in the enclosure, leveled and

3 Tighten screws until they are flush with the surface of

Installation of the Rubber Drain Hose

1 Obtain the Rubber Drain Hose Adaptor and the two

2 On one outside end of the Rubber Drain Hose Adapter

Screw

3 Secure the connection with the Silver Spring Clamp.

Boss

4 Use the Gold Screw Clamp to attach the Rubber Drain

Connecting the Drain Hose to the

Household Plumbing

The dishwasher drain hose may be connected to the drain

plumbing in one of four ways:

1 Directly to the undersink dishwasher drain connection,

2 Directly to a disposer dishwasher drain connection, as

3 To the undersink dishwasher drain connection through

4 To a disposer dishwasher drain connection through an

Information on installing air gaps and disposers can be

found in the Plumbing Preparation section of this

manual.

Figure 25

NOTE: If the dishwasher drain hose is to be connected to

a disposer dishwasher drain connection, remove the plug

from the disposer's dishwasher drain connection.

Use the supplied Rubber Drain Hose Adaptor and Drain

Hose Clamps to connect the dishwasher drain hose to the

plumbing drain connection. Use the spring clamp to

secure the Rubber Drain Hose Adaptor to the dishwasher

drain hose. Use the screw clamp to secure the Rubber

Drain Hose Adaptor to the plumbing drain connection.

The dishwasher drain hose must have one place along its

length that is securely attached 20 inches above the

cabinet floor.

Figure 27

secured, lock the two front leg levelers in place by

driving the enclosed leg leveler locking screws into

each screw boss located in front of the levelers. See

Figure 23.

the bosses.

Adaptor

hose clamps from the Dishwasher Installation Kit.

is a raised rib. Insert the drain hose into the end

without the raised rib. Be sure to fully insert the drain

hose.

Hose Adaptor to the house plumbing.

as shown in Figure 24.

shown in Figure 25.

an air gap, as shown in Figure 26.

air gap, as shown on Figure 27.