Bosch DISHWASHER Manual de instruções de instalação - Página 12

(355mm)

(533mm)

Figure 19

Figure 20

Figure 21

Top Mount

Figure 22

Placing the Dishwasher/ Securing the Dishwasher

14"

21"

Hot Water Supply Line

and Electrical Supply

Cable Position in

Channels

Side Mount

PLACING THE DISHWASHER

1 Straighten and position the hot water supply line and

the electrical supply cable as shown in Figure 19 so

that they will align with their channels under the

dishwasher base.

2 Position the dishwasher close enough to the enclosure

so that you can run the dishwasher drain hose to the

under sink drain connection. Make certain that the hot

water supply line and the electrical supply cable are in

their channels under the dishwasher base, as shown in

Figure 20.

3 Slide the dishwsher into the opening making sure that

the hot water supply line and the electrical supply

cable stay in their proper channels.

4 Make sure the dishwasher is level. Adjust the rear

leveler by turning the center screw at the front of the

dishwasher, as shown in Figure 21a. Turning the screw

clockwise raises the rear of the dishwasher. Adjust the

front levelers by turning them with a screwdriver, as

shown in Figure 21b. Turning the levelers to the right

raises the dishwasher. If additional height is needed,

shims may be added under the leveler feet.

1 Drive the mounting screws through the holes in the

mounting brackets as shown in Figure 22 for Top or

Side Mount.