Allmatic BAXS900 Руководство - Страница 9

Просмотреть онлайн или скачать pdf Руководство для Блок управления Allmatic BAXS900. Allmatic BAXS900 13 страниц. For rolling shutters

Печатать страницу

Type of activation control

Dead man mode

Radio transmitter and visible closing system

Radio transmitter and closing system not visible

Automatic control (e.g. timed closure)

Table 1 - Minimum level of protection to be considered according to UNI EN12453

Protection A

The closure is activated by the dead man command, that is holding to move (hold-to-run)

Protection B

The closure is activated by the dead man command, through a key selector or similar device to prevent unau-

thorized use

Protection C

Limitation of the forces generated by the shutter / door / gate

Protection D

Devices, such as photocells, to detect the presence of persons or obstacles

Protection E

Sensitive devices, such as non-material barriers, to detect the presence of a person

11. AUTOTEST

BAXS900 is designed according to safety standards, and the same include some tests before movement. During these tests BAXS900

activates the "SAFETY CHECK" led on the front panel and performs a series of flashes on the courtesy light. This condition informs

the user of the next automation movement.

WARNING! The AUTOTEST procedure slightly delays movement but is NECESSARY for user safety.

WARNING! The courtesy light also acts as a motion detector, so if you have a device without the built-in courtesy light, you need to

install a light connected to the COURTESY LIGHT output, placing it visibly from the areas of movement.

12. PRESA RJ11 PER MODALITA' UPS

The UPS mode allows to give a consent to a UPS (Uninterruptible Power Supply) in case of blackout.

- Connect 230Vac UPS output to network input L, N and GND of the control unit BAXS900, see 230Vac terminal block (Pag. 2).

- Connect the UPS to a 13A socket.

- Connect the RJ11 control cable to the socket on the BAXS900 and the other end to the RJ11 input socket on the back of the UPS.

WARNING! DO NOT set "Infinite working time" (DIP 3 = ON) when using UPS mode.

WARNING! The autonomy and functionality of the UPS depends on the technical characteristics of the UPS itself. Keep UPS instruc-

tions handy if used. Allmatic does not provide UPS.

6-1622623 rev. 3

Use of the closing system

Group 1

Group 2

Qualified

persons. (use in

private area)

public area)

C or E

C and D, or E

Group 3

Unqualified

persons. (public

and private area)

Not possible

C and D, or E

9 / 12