3Doodler PRO+ Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары 3Doodler PRO+. 3Doodler PRO+ 16 страниц.

Печатать страницу

How it Works:

The 3Doodler PRO+ melts filament and uses a motor

and gears (Drive Gear) to push the filament through the

pen's hot end (Nozzle) in a thin line. This process is called

extruding or extrusion, and we will refer to it throughout

this User Manual. Once extruded, the filament hardens

nearly instantly, allowing you to draw on surfaces and in

the air. This User Manual will show you how.

How do I switch the display from Celsius to Fahrenheit?

Through the main menu, you can select SEL in order to

choose whether C or F displays on the LCD screen. Simply

use the Navigation Buttons to choose between C and F on

the screen, then hit the enter. Once selected, you will be

redirected to the main menu. The temperature display will

be saved for future use.

3Doodler PRO+ Filament Details

The 3Doodler PRO+ is only compatible with

the 3Doodler-branded filaments below. Do not

attempt to use your 3Doodler PRO+ with any

third party filaments.

MATERIAL USE GUIDELINES

PLA

• Sticks to a variety of surfaces

• Glossy finish

METAL

• Sand and polish for shine

• Uses real metal

WOOD

• Uses real wood fiber

• Sand it, stain it, and fill in

wooden cracks

ABS

• Hardens quickly

• Perfect for drawing in the air

FLEXY

• Best for Doodles that need

to bend

• Flexible and stretchy

NYLON

• Strong, flexible, and durable

• Make functional parts

• Use clothing dyes to color

Step 1: Turn on your 3Doodler PRO+ and

Doodle with ABS

Plug in your 3Doodler PRO+ pen.

Using the navigation buttons, scroll

through the pre-set temperature

modes until ABS displays on the LCD

screen, then click the Enter Button.

o C ( o F) *

195-220 (383-428)

180-200 (356-392)

150-180 (338-392)

200-240 (392-464)

210-230 (392-446)

220-240 (428-464)

Turn it on.

Next, select the speed you want

on the pen using the Navigation

Buttons, then click the Enter Button.

BLUE Light

Once the Temperature and Speed are selected, the current temperature

will display on the LCD screen, and the target temperature will flash.

When the pen reaches the target temperature, the Indicator Light will

turn Blue (for pre-set temperature modes) or Green (for custom mode).

Once the Indicator Light changes, you are ready to Doodle.

Step 2: Load and Extrude Filament

Select one strand of ABS (MATTE)

Filament (provided in your

3Doodler PRO+ box).

Click the Feed Button once and

release. You will hear the Drive

Gear start.

After 10-15 seconds, Filament will

begin extruding from the Nozzle.

Extruded Filament will harden

after a few seconds.

Step 3: Learn How to Doodle in 2D

Use the box on the next page to create your first Doodle!

Draw a triangle in the box

provided using a marker, pen,

or pencil.

Doodle in a continuous unbroken

line by dragging the Filament

along the paper as if you were

writing with a pencil, with all

sides connected. Keep your

movements slow and steady.

Once the Indicator Light is

Blue, insert the Filament Strand

through the Feed Port .

Gently push the Filament into

the Feed Port until you feel the

strand being pulled through the

Drive Gear on its own.

Press the Feed Button once to

stop extrusion.

Click the Feed Button once. When

Filament starts extruding, push the

Nozzle down onto the paper to get

the Filament to stick to the surface.

When you reach the end of the

triangle, be sure to connect the two

ends. Stop extruding by clicking the

Feed Button once again.

Bend the paper outwards to pop

your triangle off.