DNP DS40 Руководство по техническому обслуживанию - Страница 5

Просмотреть онлайн или скачать pdf Руководство по техническому обслуживанию для Принтер DNP DS40. DNP DS40 6 страниц. Photo imaging
Также для DNP DS40: Краткая справка (6 страниц), Краткое руководство по эксплуатации (8 страниц), Руководство по переупаковке (2 страниц)

Paper Jam

Open the Front panel as per changing paper instructions &

remove the ribbon tray.

You should be able to see the jammed paper feed below

where the ribbon tray was mounted. Gently pull the paper

upwards until the jammed paper is released & you can see

smooth, undamaged paper feeding through the feed (Figure

7).

Cut the damaged paper away, ensuring the cut is a straight

as possible.

Remove & rewind the paper spool as per instruction for

changing the paper roll & reset the paper as per normal

process.

Ribbon Jam

Remove the ribbon cartridge as per instructions for changing a ribbon & cut the

ribbon to free the main ribbon & cartridge (Figure 8).

Carefully pull the remaining jammed ribbon from the printer ensuring that no

remnants of the ribbon remain stuck as this will impact ongoing printing (Figure 9).

Use clear sticky tape to join the cut ends of the ribbon remaining in the cartridge

& then wind the ribbon onto the take up/waste spool until the tape is out of sight

(Figure 10). We would suggest a minimum of 1 full 'set' of ribbon colours is wound

on.

Figure 8 - Cutting the

ribbon

Figure 9 - gently pull

dam aged ribbon from printer

Figure 7 - Removal of

jammed paper

Figure 10 - Direction to wind

dam aged ribbon onto spool