Draper Premier Talimatlar Kurulum ve Çalıştırma - Sayfa 7

Projeksiyon Perdesi Draper Premier için çevrimiçi göz atın veya pdf Talimatlar Kurulum ve Çalıştırma indirin. Draper Premier 7 sayfaları. 220v premier electric projection screen
Ayrıca Draper Premier için: Kurulum ve Kullanım Talimatları (2 sayfalar), Kurulum ve Kullanım Talimatları (2 sayfalar), Kurulum Talimatları (2 sayfalar), Kurulum Talimatları (4 sayfalar), Kurulum Talimatları (2 sayfalar), Kurulum Talimatları (2 sayfalar), Kurulum ve Kullanım Talimatları (4 sayfalar), Kurulum ve Kullanım Talimatları Kılavuzu (7 sayfalar)

Sayfayı Yazdır
Draper Premier Talimatlar Kurulum ve Çalıştırma
Premier

Section 10 - Wiring Diagrams: Motor with internal low-voltage controller

110-120V MOTOR AND QUIET MOTOR
110-120V Motor
(Motor with internal low-voltage controller)
(Internal Low-Voltage Controller for ILT motor)
Single Station Control
Internal Screen Wiring
White (Neutral)
Black
Green/Yellow (Ground)
Data Cable
Dashed wiring
by electrician.
RJ-9
connector
Wall Switch,
RF or IR
Receiver,
or integrated
control system.
To 110-120V Line
Motor with Internal Low-Voltage Controller: Switch-to-Motor
Back of
wall switch.
Please Note: 5V DC must be
connected to be able to set
limits using the wall switch.
Multiple Station Control
Internal Screen Wiring
White (Neutral)
Black
Green/Yellow (Ground)
Dashed wiring
by electrician.
Data Cables
RJ-9
connector
Wall Switch,
RF or IR
Receiver,
or integrated
control system.
To 110-120V Line
INSERT MOTOR DATA
CABLE HERE
Plug & Play 110-120V Motor
Single Low-Voltage Control
110-120V
Plug
(Dry Contacts or Data Cable connection)
CAUTION: Although both Dry Contact and Data Cable
connections are shown, only one connection type
per motor should be used.
Please Note:
• This Splitter/Jack is located inside the motor-end
endcap of screen. To access, remove access panel
from endcap.
• Data Cables to switches or to additional motors can be
plugged into any of the three open jacks.
(Motor with internal low-voltage controller)
Multiple Low-Voltage Controls
Internal Screen Wiring
White (Neutral)
Black
Green (Ground)
Data
Cable
Wall Switch,
RF or IR
Receiver,
or integrated
110-120V
control system.
Plug
control systems.
page 7 of 7
Internal Screen Wiring
White (Neutral)
Black
Green (Ground)
Data
Cables
Wall Switches,
RF or IR
Receivers,
or integrated