Anderson ANM75 Kullanım Kılavuzu - Sayfa 7

Brülör Anderson ANM75 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Anderson ANM75 18 sayfaları.

Fig 4. ANM75 Series Burner Input Curve

10. Burner Installation

1. Make sure that the area is clean.

2. Store the components in a cool, clean, dry room.

3. Keep the components in the original package as long as possible

1. Make sure that the components are clean and free of damage.

2. Protect the components from weather, damage, dirt and moisture.

3. Protect the components from excessive temperatures and humidity.

4. Use appropriate support equipment, i.e., harnesses, straps, chains etc. when lifting

burner components.

10.3 Pre–Installation Checklist

If there are corrosive fumes or materials in the surrounding air, find a clean air source

to supply to the burner. Observe ambient temperature limits as stated in Datasheet.

Combustion air from outside of burner room, needs at least 6 cm

sufficient fresh, outdoor combustion air.

Combustion air from inside duct, there must be a minimum of 18% O

process air flow to ensure proper burner performance.

Do not allow exhaust gases to accumulate in the work area. Provide a means for

exhausting these gases from the building by blower, install the burner so it may be

easily accessed for inspection.

Be sure the burner operating environment matches the original operating

specifications. Check the following items:

– Voltage, frequency, and stability of electrical power

Anderson Thermal Soluions（Suzhou）Co. ,Ltd.

Anderson Thermal Solutions – ANM75 Burner Operation Manual

Fig5. ANM75 Series Burner Flame Length Curve

per 1 kW to supply

present in the