Autonics ADS-SE1/2 Manuel

Aksesuarlar Autonics ADS-SE1/2 için çevrimiçi göz atın veya pdf Manuel indirin. Autonics ADS-SE1/2 6 sayfaları. Door side sensor

Sayfayı Yazdır

ADS-SE1/2

Door Side Sensor

Features

● Long sensing distance: 0 to 10m

● High ambient intensity of illumination:

Max. 100,000lx of sunlight

● Easy to connect sensor head to controller

● Easy sensitivity setting

(automatic sensitivity setting by one push method)

● Self-diagnosis function

● Compact Size (W77×L44×H24mm)

: minimized max. 20% than existing product

(based on depth)

Please read "Caution for your safety" in operation

manual before using.

Specifications

Model

Sensing type

Sensing distance

Power supply

Power consumption/Current

※ 1

Control output

Response time

Output holding time

Available sensor set

Indicator

Light source

Vibration

Shock

Ambient illumination Sunlight: Max. 100,000lx (Receiver illumination)

Environ-

Ambient temperature -20 to 55℃, storage: -25 to 60℃

ment

Ambient humidity

Protection structure

Sensor cable length

Sensor cable

Material

Accessory

Approval

※ 2

Weight

※ 1: Do not use Load which is beyond the rated capacity of contact point of Relay.

It can cause bad insulation, contact fusion, bad contact, relay breakdown, and fire etc.

※2 : The weight includes packaging. The weight in parentheses is for unit only.

※ Please purchase 1 set of sensor separately when mounting 2 sets of sensor.

※ The mounting bracket of sensor (ADS-SB12, ADS-SB10) is sold separately.

※ It is enable to purchase a controller (ADS-SEC1/2) separately.

※ The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.

C-16

ADS-SE1 (1-channel)

Through-beam type

0 to 10m

12-24VAC ±10% 50/60Hz / 12-24VDC ±10% (Ripple P-P: Max. 10% )

AC: Max. 2VA, DC: Max. 50mA

Contact capacity: 50VDC 0.3A (resistive load)

Contact composition: 1c

Relay life cycle: Mechanical- Min. 5,000,000 operations, Electrical- Min. 100,000 operations

Approx. 50ms (from light OFF)

Approx. 500ms (from light ON)

1 channel

OUT1 indicator: red, OUT2 indicator: green (Refer to C-20 for the display status in operation)

Infrared LED (850nm modulated)

1.5mm amplitude at frequency of 10 to 55Hz (for 1min.) in each X, Y, Z direction for 2 hours

500m/s

(approx. 50G) in each X, Y, Z direction for 3 times

35 to 85% RH, storage: 35 to 85% RH

IP30 (IEC standard)

Ø2.4mm, 1-wire, length: 5m (AWG26, core diameter: 0.16mm, number of cores: 7, insulator out diameter: Ø1.32mm)

Case: ABS, Lens: PMMA

Sensor 1set (ADS-SHP), Fixing bolt (M4×20) for controller: 2EA

Approx. 450g (approx. 300g)

ADS-SE2 (2-channel)

2 channels