CORNING EDGE Manuel - Sayfa 8

Raflar ve Standlar CORNING EDGE için çevrimiçi göz atın veya pdf Manuel indirin. CORNING EDGE 11 sayfaları. Single-module housing
Ayrıca CORNING EDGE için: Kurulum (4 sayfalar)

Sayfayı Yazdır

INSTALLING MODULES

NOTE: The FZB may have either the EDGE™ or the EDGE8™ module trays installed. For illustrative

purposes, EDGE modules are shown in the remainder of the instruction.

Step 1:

The module frame can be tilted to provide better access for module or panel installation,

if desired. To tilt the frame, lift up on the module frame and slide the screws in the slots as

shown in Figure 13.

Step 2:

Install the modules or panels from the front or the rear as shown in Figure 14. The module

frame can be tilted or not when installing the modules / panels.

Step 3:

If the module frame was tilted to install the modules, return the frame to its centered position

as shown in Figure 13.

STANDARD RECOMMENDED PROCEDURE 003-825-AEN | ISSUE 7 | NOVEMBER 2020 | PAGE 8 OF 11

Figure 13

Figure 14