CORNING EDGE Посібник - Сторінка 8

Переглянути онлайн або завантажити pdf Посібник для Стелажі та підставки CORNING EDGE. CORNING EDGE 11 сторінок. Single-module housing
Також для CORNING EDGE: Встановлення (4 сторінок)

5.

INSTALLING MODULES

NOTE: The FZB may have either the EDGE™ or the EDGE8™ module trays installed. For illustrative
purposes, EDGE modules are shown in the remainder of the instruction.
Step 1:
The module frame can be tilted to provide better access for module or panel installation,
if desired. To tilt the frame, lift up on the module frame and slide the screws in the slots as
shown in Figure 13.
Step 2:
Install the modules or panels from the front or the rear as shown in Figure 14. The module
frame can be tilted or not when installing the modules / panels.
Step 3:
If the module frame was tilted to install the modules, return the frame to its centered position
as shown in Figure 13.
STANDARD RECOMMENDED PROCEDURE 003-825-AEN | ISSUE 7 | NOVEMBER 2020 | PAGE 8 OF 11
Figure 13
Figure 14