CORNING EDGE Manual - Página 8

Navegue en línea o descargue pdf Manual para Bastidores y soportes CORNING EDGE. CORNING EDGE 11 páginas. Single-module housing
También para CORNING EDGE: Instalación (4 páginas)

Imprimir página

INSTALLING MODULES

NOTE: The FZB may have either the EDGE™ or the EDGE8™ module trays installed. For illustrative

purposes, EDGE modules are shown in the remainder of the instruction.

Step 1:

The module frame can be tilted to provide better access for module or panel installation,

if desired. To tilt the frame, lift up on the module frame and slide the screws in the slots as

shown in Figure 13.

Step 2:

Install the modules or panels from the front or the rear as shown in Figure 14. The module

frame can be tilted or not when installing the modules / panels.

Step 3:

If the module frame was tilted to install the modules, return the frame to its centered position

as shown in Figure 13.

STANDARD RECOMMENDED PROCEDURE 003-825-AEN | ISSUE 7 | NOVEMBER 2020 | PAGE 8 OF 11

Figure 13

Figure 14