CORNING EDGE 매뉴얼 - 페이지 8

{카테고리_이름} CORNING EDGE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING EDGE 11 페이지. Single-module housing
CORNING EDGE에 대해서도 마찬가지입니다: 설치 (4 페이지)

INSTALLING MODULES

NOTE: The FZB may have either the EDGE™ or the EDGE8™ module trays installed. For illustrative

purposes, EDGE modules are shown in the remainder of the instruction.

Step 1:

The module frame can be tilted to provide better access for module or panel installation,

if desired. To tilt the frame, lift up on the module frame and slide the screws in the slots as

shown in Figure 13.

Step 2:

Install the modules or panels from the front or the rear as shown in Figure 14. The module

frame can be tilted or not when installing the modules / panels.

Step 3:

If the module frame was tilted to install the modules, return the frame to its centered position

as shown in Figure 13.

STANDARD RECOMMENDED PROCEDURE 003-825-AEN | ISSUE 7 | NOVEMBER 2020 | PAGE 8 OF 11

Figure 13

Figure 14