Caroma Invisi Series II Посібник з монтажу - Сторінка 15
Переглянути онлайн або завантажити pdf Посібник з монтажу для Туалети Caroma Invisi Series II. Caroma Invisi Series II 20 сторінок. Urinal concealed cistern
Також для Caroma Invisi Series II: Посібник (16 сторінок)
Друкувати сторінку
Pneumatic Tube Connections
Blanking Panel Mounting
Remote Panel Mounting
Firmly connect the pneumatic tube into
the full flush position. The tube should be
inserted approx. 16mm until it hits a stop.
NOTE:
•
1.8L Urinal Cisterns are supplied with 4m length pneumatic tube.
•
4m lengths of pneumatic tube can be purchased separately Part No. 237 702.
1
1
Attach the tube to the cistern as shown above. Break out tab in the Top Panel or Dust Cover Panel to allow
the Tube to protrude and clip back into position. Feed the 4m length of Pneumatic Tube through the
framework and out through the Mounting Box. Apply tape over end of tube to prevent any dirt from getting
inside and tuck neatly back inside the Mounting Box. When finishing the wall, clad and tile right up to the
edge of the Access Window and or Remote Mounting Box.
2
2
OR
Preparation for Fitout
Attach the tube to the cistern as
shown above. Tuck neatly back
inside the Access Window and
clip the dust cover panel back
into position. When finishing the
wall, clad and tile right up to the
edge of the Access Window.
3
OR