Caroma Invisi Series II Посібник з монтажу - Сторінка 13
Переглянути онлайн або завантажити pdf Посібник з монтажу для Туалети Caroma Invisi Series II. Caroma Invisi Series II 20 сторінок. Urinal concealed cistern
Також для Caroma Invisi Series II: Посібник (16 сторінок)
Друкувати сторінку
Custom Panel Access
1.
The design of the custom panel
is limited only by the designers
imagination.
2.
Cistern must be mounted using the
attached Mounting Brackets. Refer
to appropriate installation method on
previous pages.
3.
Allowances for access to at least the
cistern internals if not the entire cistern
must be incorporated into the design.
The minimum front access requirements
for servicing cistern internal are:
195mm
The minimum top access requirements
for servicing cistern internal are:
195mm
The minimum front access requirements
for cistern removal are:
90mm
100mm Min.
90mm
400mm
50mm
Installing the Cistern -
4.
Check cistern and all joints for leaks.
5.
Turn Isolating Tap OFF. Continue
with Preparation for Fitout on page 15.
237 002