4Access Orion IV Посібник з монтажу - Сторінка 9

Переглянути онлайн або завантажити pdf Посібник з монтажу для Платіжний термінал 4Access Orion IV. 4Access Orion IV 13 сторінок.

Configuration

Set Date/Time Manually

Current AM/PM:

Setting Up a Static IP Address (OPTIONAL)

Press

Select Configuration.

Select Configure Terminal.

Select Global Configuration.

Select Ethernet Configuration.

Select DHCP setting and change value to NO.

Now select each static IP parameter including IP address, Subnet, Gateway and

DNS address and input the static values. (Note: Press

three times to create a period between values.)

Press the CLEAR key and choose YES to save your entries.

Choose YES to restart the terminal and save your entries.

You can run an IP Diagnostics test at any time to determine if Ethernet connectivity has

been established.

Press

Select IP Diagnostics.

The display will indicate whether the terminal is set for DHCP or static IP address

assignment. The terminal will then attempt to connect to the gateway/router, and if

successful will attempt to connect to various programmed host servers via IP. Each

entry will indicate a successful or failed connection attempt.

Select AM or PM by pressing the appropriate key:

1. AM

2. PM

Date and time are updated and terminal will reboot to save the

change. The terminal will then return to the idle screen:

Select Transaction Type

from the main menu and enter terminal's password.

Orion Installation Guide

then the ALPHA key