Auber Instruments WS Series Betriebs- und Gebrauchsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebs- und Gebrauchsanleitung für Temperaturregler Auber Instruments WS Series herunter. Auber Instruments WS Series 18 Seiten. Programmable pid temperature controller with dual probe
Auch für Auber Instruments WS Series: Kurzanleitung (15 seiten), Kurzanleitung (14 seiten), Betriebs- und Gebrauchsanleitung (18 seiten), Kurzanleitung (14 seiten)

Seite drucken

Auber Instruments WS Series Betriebs- und Gebrauchsanleitung

The connection of the controller should be done in the following steps.

 Plug the temperature sensor to the back of the controller.

 Plug the power cord to the power outlet on the wall.

 Turn on the controller to make sure the controller powers up properly and the

temperature display is in the range expected. Then, turn off the controller.

 Plug the heater to the back of the controller. If the heater has a switch, put it in the

off position. Put the sensor inside the container to be controlled.

 Turn on the controller.

 Turn on the heating device.

Remark The connector of sensor contains a slot for correct pin connection. It also has a

spring lock to prevent disconnections from accidental pulling on the cable. The following

pictures show how to install and remove it.

Fig 3a. How to install the sensor.