Auber Instruments WS Series Operation & Instruction Manual - Page 5
Browse online or download pdf Operation & Instruction Manual for Temperature Controller Auber Instruments WS Series. Auber Instruments WS Series 18 pages. Programmable pid temperature controller with dual probe
Also for Auber Instruments WS Series: Quick Manual (15 pages), Quick Manual (14 pages), Operation & Instruction Manual (18 pages), Quick Manual (14 pages)
Print Page
The connection of the controller should be done in the following steps.
Plug the temperature sensor to the back of the controller.
Plug the power cord to the power outlet on the wall.
Turn on the controller to make sure the controller powers up properly and the
temperature display is in the range expected. Then, turn off the controller.
Plug the heater to the back of the controller. If the heater has a switch, put it in the
off position. Put the sensor inside the container to be controlled.
Turn on the controller.
Turn on the heating device.
Remark The connector of sensor contains a slot for correct pin connection. It also has a
spring lock to prevent disconnections from accidental pulling on the cable. The following
pictures show how to install and remove it.
Fig 3a. How to install the sensor.
5