HighPoint R1108A Handbuch zur Schnellinstallation - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für Computer Hardware HighPoint R1108A herunter. HighPoint R1108A 11 Seiten. 8x m.2 port to pcie 3.0 x16 nvme hba

Seite drucken

R1108A Hardware Installation

Step 1. On the rear of the R1108A, remove the six screws that secure

the unit's heat sink to the PCB.

Step 2. After removing the screws, carefully remove fan's power cable

from the right-side of the heatsink as shown below, then carefully

flip the heatsink to the left (like turning a page from a book).

Note:

Take care when moving the heatsink to prevent damaging

the left fan's power cable.