HighPoint R1108A Manuel d'installation rapide - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} HighPoint R1108A. HighPoint R1108A 11 pages. 8x m.2 port to pcie 3.0 x16 nvme hba

Imprimer la page

R1108A Hardware Installation

Step 1. On the rear of the R1108A, remove the six screws that secure

the unit's heat sink to the PCB.

Step 2. After removing the screws, carefully remove fan's power cable

from the right-side of the heatsink as shown below, then carefully

flip the heatsink to the left (like turning a page from a book).

Note:

Take care when moving the heatsink to prevent damaging

the left fan's power cable.