HighPoint R1108A Hızlı Kurulum Kılavuzu - Sayfa 4

Bilgisayar Donanımı HighPoint R1108A için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. HighPoint R1108A 11 sayfaları. 8x m.2 port to pcie 3.0 x16 nvme hba

Sayfayı Yazdır

R1108A Hardware Installation

Step 1. On the rear of the R1108A, remove the six screws that secure

the unit's heat sink to the PCB.

Step 2. After removing the screws, carefully remove fan's power cable

from the right-side of the heatsink as shown below, then carefully

flip the heatsink to the left (like turning a page from a book).

Note:

Take care when moving the heatsink to prevent damaging

the left fan's power cable.