HighPoint R1108A Manual de instalación rápida - Página 4
Navegue en línea o descargue pdf Manual de instalación rápida para Hardware informático HighPoint R1108A. HighPoint R1108A 11 páginas. 8x m.2 port to pcie 3.0 x16 nvme hba
Imprimir páginaR1108A Hardware Installation
Step 1. On the rear of the R1108A, remove the six screws that secure
the unit's heat sink to the PCB.
Step 2. After removing the screws, carefully remove fan's power cable
from the right-side of the heatsink as shown below, then carefully
flip the heatsink to the left (like turning a page from a book).
Note:
Take care when moving the heatsink to prevent damaging
the left fan's power cable.
4