HighPoint R1108A Panduan Instalasi Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Perangkat Keras Komputer HighPoint R1108A. HighPoint R1108A 11 halaman. 8x m.2 port to pcie 3.0 x16 nvme hba

Halaman Cetak

R1108A Hardware Installation

Step 1. On the rear of the R1108A, remove the six screws that secure

the unit's heat sink to the PCB.

Step 2. After removing the screws, carefully remove fan's power cable

from the right-side of the heatsink as shown below, then carefully

flip the heatsink to the left (like turning a page from a book).

Note:

Take care when moving the heatsink to prevent damaging

the left fan's power cable.