Andersen 400 Series Manuel de modification - Page 2
Parcourez en ligne ou téléchargez le pdf Manuel de modification pour {nom_de_la_catégorie} Andersen 400 Series. Andersen 400 Series 2 pages. Lock mechanism
Également pour Andersen 400 Series : Manuel d'installation et de retrait (2 pages), Manuel de démarrage rapide (6 pages), Ajustement (4 pages)
Imprimer la page
1. Pop Out Latch
• Remove white packing clip covering latch.
• Insert a 1/8" flat blade screwdriver into Latch Reversal
Hole until it bottoms out.
• Apply downward pressure on screwdriver handle while
pulling Latch up and out, as shown.
• Remove screwdriver from Latch Reversal Hole.
• Handing of lock can now be changed.
2. Rotate Latch
• Grasp Latch, pull outward slightly, and rotate 180°.
Position Latch so that sloped portion contacts Latch
Receiver first.
• Push Latch back into Lock Mechanism Housing.
▶
Lock mechanism handing change procedure is complete.
Latch Reversal Hole
Flat Blade Screwdriver
Up
Latch
2
Lock Mechanism Handing Change Guide
Latch
Latch
Lock
Mechanism
Housing