Andersen 400 Series Handleiding wijzigen - Pagina 2
Blader online of download pdf Handleiding wijzigen voor {categorie_naam} Andersen 400 Series. Andersen 400 Series 2 pagina's. Lock mechanism
Ook voor Andersen 400 Series: Installatie- en verwijderingshandleiding (2 pagina's), Snelstarthandleiding (6 pagina's), Aanpassing (4 pagina's)
Pagina afdrukken
1. Pop Out Latch
• Remove white packing clip covering latch.
• Insert a 1/8" flat blade screwdriver into Latch Reversal
Hole until it bottoms out.
• Apply downward pressure on screwdriver handle while
pulling Latch up and out, as shown.
• Remove screwdriver from Latch Reversal Hole.
• Handing of lock can now be changed.
2. Rotate Latch
• Grasp Latch, pull outward slightly, and rotate 180°.
Position Latch so that sloped portion contacts Latch
Receiver first.
• Push Latch back into Lock Mechanism Housing.
▶
Lock mechanism handing change procedure is complete.
Latch Reversal Hole
Flat Blade Screwdriver
Up
Latch
2
Lock Mechanism Handing Change Guide
Latch
Latch
Lock
Mechanism
Housing