- ページ 2

錠前 Andersen 400 SeriesのPDF 変更マニュアルをオンラインで閲覧またはダウンロードできます。Andersen 400 Series 2 ページ。 Lock mechanism
Andersen 400 Series にも：取り付け・取り外しマニュアル (2 ページ), クイック・スタート・マニュアル (6 ページ), 調整 (4 ページ)

1. Pop Out Latch

• Remove white packing clip covering latch.

• Insert a 1/8" flat blade screwdriver into Latch Reversal

Hole until it bottoms out.

• Apply downward pressure on screwdriver handle while

pulling Latch up and out, as shown.

• Remove screwdriver from Latch Reversal Hole.

• Handing of lock can now be changed.

2. Rotate Latch

• Grasp Latch, pull outward slightly, and rotate 180°.

Position Latch so that sloped portion contacts Latch

Receiver first.

• Push Latch back into Lock Mechanism Housing.

▶

Lock mechanism handing change procedure is complete.

Latch Reversal Hole

Flat Blade Screwdriver

Latch

Lock Mechanism Handing Change Guide

Latch

Lock

Mechanism

Housing