Andersen 400 Series 변경 매뉴얼 - 페이지 2
{카테고리_이름} Andersen 400 Series에 대한 변경 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Andersen 400 Series 2 페이지. Lock mechanism
Andersen 400 Series에 대해서도 마찬가지입니다: 설치 및 제거 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (6 페이지), 조정 (4 페이지)
페이지 인쇄
1. Pop Out Latch
• Remove white packing clip covering latch.
• Insert a 1/8" flat blade screwdriver into Latch Reversal
Hole until it bottoms out.
• Apply downward pressure on screwdriver handle while
pulling Latch up and out, as shown.
• Remove screwdriver from Latch Reversal Hole.
• Handing of lock can now be changed.
2. Rotate Latch
• Grasp Latch, pull outward slightly, and rotate 180°.
Position Latch so that sloped portion contacts Latch
Receiver first.
• Push Latch back into Lock Mechanism Housing.
▶
Lock mechanism handing change procedure is complete.
Latch Reversal Hole
Flat Blade Screwdriver
Up
Latch
2
Lock Mechanism Handing Change Guide
Latch
Latch
Lock
Mechanism
Housing