e-survey E500 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penerima e-survey E500. e-survey E500 19 halaman.
Juga untuk e-survey E500: Manual (19 halaman)

Halaman Cetak
e-survey E500 Panduan Pengguna

3.5.2 MEMS Tilt Survey

When MEMS sensor is activated on E500. To calibrate the MEMS sensor, receiver
must be in Fixed solution. In SurPad4.0 software, connect device and click "Device" ->
"Device Settings", enable "Pole Tilt Correction" function. Then, go to "Survey" ->
"Point Survey" page. The software will guide user to calibrate the sensor.
•
Input the correct pole height
•
Draw circle on the ground using the pole
•
Follow the guide and shake the pole back and forth for around 5-10 seconds or
walk in straight line around 10 meters until it shows "Ready"
Web:
www.esurvey-gnss.com
E500 User Manual