e-survey E500 User Manual - Page 13

Browse online or download pdf User Manual for Receiver e-survey E500. e-survey E500 19 pages.
Also for e-survey E500: Manual (19 pages)

Print Page

3.5.2 MEMS Tilt Survey

When MEMS sensor is activated on E500. To calibrate the MEMS sensor, receiver

must be in Fixed solution. In SurPad4.0 software, connect device and click "Device" ->

"Device Settings", enable "Pole Tilt Correction" function. Then, go to "Survey" ->

"Point Survey" page. The software will guide user to calibrate the sensor.

•

Input the correct pole height

•

Draw circle on the ground using the pole

•

Follow the guide and shake the pole back and forth for around 5-10 seconds or

walk in straight line around 10 meters until it shows "Ready"

Web:

www.esurvey-gnss.com

E500 User Manual