Dell Dimension 2200 Manual Penggantian - Halaman 3

Jelajahi secara online atau unduh pdf Manual Penggantian untuk Server Dell Dimension 2200. Dell Dimension 2200 9 halaman. Vga card installation instructions
Juga untuk Dell Dimension 2200: Petunjuk Instalasi (1 halaman), Manual (50 halaman)

Halaman Cetak

3. Remove the computer cover (see Figure 1).

a. Remove the four screws along the back edge of the cover. If a keylock

screw is installed in one of the cover-mounting screw locations, use the

key provided with the system to remove it.

b. Slide the cover backward about an inch; then grasp the front of the cover

and the handle at the back of the cover, and lift the cover straight up off

the chassis.

cover-mounting

screws (4)

Figure 1. Removing the Computer Cover

4. If you are adding a secondary microprocessor, remove the terminator

card from the second microprocessor connector (see Figure 2).

NOTE: If you are not adding a secondary microprocessor, do not remove the

terminator card. Go to step 5.

handle

Dell PowerEdge 2200 Systems Microprocessor Replacement