- ページ 3

サーバー Dell Dimension 2200のPDF 交換マニュアルをオンラインで閲覧またはダウンロードできます。Dell Dimension 2200 9 ページ。 Vga card installation instructions
Dell Dimension 2200 にも：インストレーション・インストラクション (1 ページ), マニュアル (50 ページ)

ページを印刷する

3. Remove the computer cover (see Figure 1).

a. Remove the four screws along the back edge of the cover. If a keylock

screw is installed in one of the cover-mounting screw locations, use the

key provided with the system to remove it.

b. Slide the cover backward about an inch; then grasp the front of the cover

and the handle at the back of the cover, and lift the cover straight up off

the chassis.

cover-mounting

screws (4)

Figure 1. Removing the Computer Cover

4. If you are adding a secondary microprocessor, remove the terminator

card from the second microprocessor connector (see Figure 2).

NOTE: If you are not adding a secondary microprocessor, do not remove the

terminator card. Go to step 5.

handle

Dell PowerEdge 2200 Systems Microprocessor Replacement