Dell Dimension 2200 Руководство по замене - Страница 3
Просмотреть онлайн или скачать pdf Руководство по замене для Сервер Dell Dimension 2200. Dell Dimension 2200 9 страниц. Vga card installation instructions
Также для Dell Dimension 2200: Инструкции по установке (1 страниц), Руководство (50 страниц)
Печатать страницу
3. Remove the computer cover (see Figure 1).
a. Remove the four screws along the back edge of the cover. If a keylock
screw is installed in one of the cover-mounting screw locations, use the
key provided with the system to remove it.
b. Slide the cover backward about an inch; then grasp the front of the cover
and the handle at the back of the cover, and lift the cover straight up off
the chassis.
cover-mounting
screws (4)
Figure 1. Removing the Computer Cover
4. If you are adding a secondary microprocessor, remove the terminator
card from the second microprocessor connector (see Figure 2).
NOTE: If you are not adding a secondary microprocessor, do not remove the
terminator card. Go to step 5.
handle
Dell PowerEdge 2200 Systems Microprocessor Replacement
3