Dell Dimension 2200 교체 매뉴얼 - 페이지 3

{카테고리_이름} Dell Dimension 2200에 대한 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dell Dimension 2200 9 페이지. Vga card installation instructions
Dell Dimension 2200에 대해서도 마찬가지입니다: 설치 지침 (1 페이지), 매뉴얼 (50 페이지)

페이지 인쇄

3. Remove the computer cover (see Figure 1).

a. Remove the four screws along the back edge of the cover. If a keylock

screw is installed in one of the cover-mounting screw locations, use the

key provided with the system to remove it.

b. Slide the cover backward about an inch; then grasp the front of the cover

and the handle at the back of the cover, and lift the cover straight up off

the chassis.

cover-mounting

screws (4)

Figure 1. Removing the Computer Cover

4. If you are adding a secondary microprocessor, remove the terminator

card from the second microprocessor connector (see Figure 2).

NOTE: If you are not adding a secondary microprocessor, do not remove the

terminator card. Go to step 5.

handle

Dell PowerEdge 2200 Systems Microprocessor Replacement