Dell Dimension 2200 Instrukcja wymiany - Strona 3
Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Serwer Dell Dimension 2200. Dell Dimension 2200 9 stron. Vga card installation instructions
Również dla Dell Dimension 2200: Instrukcje instalacji (1 strony), Podręcznik (50 strony)
3. Remove the computer cover (see Figure 1).
a. Remove the four screws along the back edge of the cover. If a keylock
screw is installed in one of the cover-mounting screw locations, use the
key provided with the system to remove it.
b. Slide the cover backward about an inch; then grasp the front of the cover
and the handle at the back of the cover, and lift the cover straight up off
the chassis.
cover-mounting
screws (4)
Figure 1. Removing the Computer Cover
4. If you are adding a secondary microprocessor, remove the terminator
card from the second microprocessor connector (see Figure 2).
NOTE: If you are not adding a secondary microprocessor, do not remove the
terminator card. Go to step 5.
handle
Dell PowerEdge 2200 Systems Microprocessor Replacement
3