Aeotec Water Sensor 7 Pro Panduan Pengguna - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Aeotec Water Sensor 7 Pro. Aeotec Water Sensor 7 Pro 14 halaman. Water sensor
Juga untuk Aeotec Water Sensor 7 Pro: Manual (3 halaman), Panduan Memulai Cepat (8 halaman), Panduan Pengguna (9 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (9 halaman)
Halaman Cetak
AEOTEC User Manual
Screw Terminal
The product must support the interconnection of external binary sensors as well as actuators and dry-
contacts. The product allows interconnection with external sensors/actuators via 3-pin screw terminals
with the following pinout:
• #1: Ground
• #2: Digital Input
• #3: VCC (direct battery supply)
VCC + Ground terminals can be used to externally power the sensor with a 3.6V battery or special
power adapter (which is not included in the scope of delivery). Digital + VCC is used to connect the
external dry contact.
Link testing
When activated by configuration parameter #5 the device can perform a link test with device No.1. Double-clicking the
tamper will start the process. As a result, the GREEN LED will blink two times in case of success and the RED LED will
blink two times in case of failure.
Page 6