Aeotec Water Sensor 7 Pro Kullanıcı Kılavuzu - Sayfa 9

Aksesuarlar Aeotec Water Sensor 7 Pro için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aeotec Water Sensor 7 Pro 14 sayfaları. Water sensor
Ayrıca Aeotec Water Sensor 7 Pro için: Manuel (3 sayfalar), Hızlı Başlangıç Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (9 sayfalar), Kullanıcı Kılavuzu (13 sayfalar), Kullanıcı Kılavuzu (9 sayfalar)

AEOTEC User Manual

Screw Terminal

The product must support the interconnection of external binary sensors as well as actuators and dry-

contacts. The product allows interconnection with external sensors/actuators via 3-pin screw terminals

with the following pinout:

• #1: Ground

• #2: Digital Input

• #3: VCC (direct battery supply)

VCC + Ground terminals can be used to externally power the sensor with a 3.6V battery or special

power adapter (which is not included in the scope of delivery). Digital + VCC is used to connect the

external dry contact.

Link testing

When activated by configuration parameter #5 the device can perform a link test with device No.1. Double-clicking the

tamper will start the process. As a result, the GREEN LED will blink two times in case of success and the RED LED will

blink two times in case of failure.

Page 6