Aeotec Water Sensor 7 Pro 사용자 설명서 - 페이지 9
{카테고리_이름} Aeotec Water Sensor 7 Pro에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec Water Sensor 7 Pro 14 페이지. Water sensor
Aeotec Water Sensor 7 Pro에 대해서도 마찬가지입니다: 매뉴얼 (3 페이지), 빠른 시작 매뉴얼 (8 페이지), 사용자 설명서 (9 페이지), 사용자 설명서 (13 페이지), 사용자 설명서 (9 페이지)
페이지 인쇄
AEOTEC User Manual
Screw Terminal
The product must support the interconnection of external binary sensors as well as actuators and dry-
contacts. The product allows interconnection with external sensors/actuators via 3-pin screw terminals
with the following pinout:
• #1: Ground
• #2: Digital Input
• #3: VCC (direct battery supply)
VCC + Ground terminals can be used to externally power the sensor with a 3.6V battery or special
power adapter (which is not included in the scope of delivery). Digital + VCC is used to connect the
external dry contact.
Link testing
When activated by configuration parameter #5 the device can perform a link test with device No.1. Double-clicking the
tamper will start the process. As a result, the GREEN LED will blink two times in case of success and the RED LED will
blink two times in case of failure.
Page 6