Aeotec Water Sensor 7 Pro User Manual - Page 9
Browse online or download pdf User Manual for Accessories Aeotec Water Sensor 7 Pro. Aeotec Water Sensor 7 Pro 14 pages. Water sensor
Also for Aeotec Water Sensor 7 Pro: Manual (3 pages), Quick Start Manual (8 pages), User Manual (9 pages), User Manual (13 pages), User Manual (9 pages)
Print Page
AEOTEC User Manual
Screw Terminal
The product must support the interconnection of external binary sensors as well as actuators and dry-
contacts. The product allows interconnection with external sensors/actuators via 3-pin screw terminals
with the following pinout:
• #1: Ground
• #2: Digital Input
• #3: VCC (direct battery supply)
VCC + Ground terminals can be used to externally power the sensor with a 3.6V battery or special
power adapter (which is not included in the scope of delivery). Digital + VCC is used to connect the
external dry contact.
Link testing
When activated by configuration parameter #5 the device can perform a link test with device No.1. Double-clicking the
tamper will start the process. As a result, the GREEN LED will blink two times in case of success and the RED LED will
blink two times in case of failure.
Page 6