3D Systems Cubify CUBEX Duo Manual - Halaman 6

Jelajahi secara online atau unduh pdf Manual untuk Printer 3D 3D Systems Cubify CUBEX Duo. 3D Systems Cubify CUBEX Duo 10 halaman. Replacing a main board pcb
Juga untuk 3D Systems Cubify CUBEX Duo: Manual Penggantian (13 halaman), Manual Penggantian (17 halaman), Manual (10 halaman)

Halaman Cetak
3D Systems Cubify CUBEX Duo Manual

Voltage Measurement Locations

Depending which stepper motor chip voltage you want to read, you will need to
position your multimeter in different positions of the board. You will need to place a
small screwdriver with one end of the multimeter clipped onto it on the small screw
head labelled TP – and another end of the multimeter will need to be set to ground
on the board.
TP X will measure the voltage for the X axis.
TP Y will measure the voltage for the Y axis.
TP Z will measure the voltage for the Z axis.
TP E1, TP E2 and TP E3 will measure the voltage for print jets 1, 2 and 3.
TP Y
TP X
TP Z
Ground
6